I found out on Monday that I am a finalist in a competition. The competition is being run by the nice people at Printed.com.
The “Square Flair-Off design competition” brief competition was to design a 150mm square leaflet. I used a pen and ink drawing that I had done as the basis for the design.
Sadly for me, I didn’t read through the rules properly (let that be a lesson) and notice the fact that the final leg of the competition is being held on Facebook. Now I don’t do Facebook – just because I am contrary – so this gives me a bit of a problem.
As I am not on Facebook, I don’t have any Facebook friends and because of the vagaries of Facebook, it is unlikely that I will get enough people voting for my design. It wasn’t that good anyway…
Still if you do feel like helping out here’s the link to my entry:
I have been doing quite a bit of painting on paper lately, rather than my usual support which is canvas. I love the way that the paint moves on paper, especially when I water it down.
Now I know that I may well get someone saying that I shouldn’t water down acrylic paint with just water. I do add a little airbrush medium too but it is mainly water. I only do this when I am painting on paper and, in 35 years or so of using acrylics, I have never had any adhesion problems.
I have also added a little acrylic ink in the form of lines and doodles, as well as a bit of pastel.
I keep telling myself that I need to do paintings that fit into the frames that I already have in stock but, quite often, I get so wrapped up in the moment of creation that I completely forget and just grab the first piece of decent watercolour paper that I can lay my hands on. 🙂
I have been busy doing some more prints of my paintings, including the ones that other people are determined to sell without informing me!
I have also had some fun making some digital art and have listed them on my Folksy shop, which I am sad to say I have neglected for the past year or so! Still never too late…
I love animals and thought that it would be fun to create some cheerful stuff using them as the subject matter. I am using pigment inks and heavy, archival quality paper, so they should stay nice and bright for a good while!
Here are a selection:
I am now working on some prints that will be a combination of hand and digital work. I am starting off with a hand painted piece, photographing it, printing it and then adding further embellishment to each print, so that every print will be unique.
Yet again, this image is appearing on various websites, where they have the nerve to not only claim copyright of it but also attribute it to some bogus artist, not me in other words. Some are giving it away as free wallpaper, others are actually selling prints of it.
In some cases they haven’t even bothered changing the file name. I get so frustrated with this kind of illegal use of my work. If someone wanted to use my work for non profit applications they could at least ask! As for the ones making money out of it, I just hope that their karma catches up with them.
I try not to put up very high resolution images, to discourage anyone from using them but if they are really, really low resolution then there isn’t much point in displaying them at all (goes outside to scream).
OK, rant over!
Anyway if anyone wants to buy prints of this or any of my paintings, please contact me. I will be putting some into my Etsy shop, but I can’t afford to list them all just now, so if there is something that you don’t see in the shop, then contact me. I can accept payments by Paypal.
The last couple of days, I have had a polymer clay frenzy. I needed some buttons and decided to make some. However, polymer clay buttons are a bit like Pringles, once you start, you can’t stop.
I think that this may continue for some time – because it’s fun!
I made some floral ones, using a mould that I made from an antique glass button. I added a little mica powder before baking, then after baking I rubbed a little acrylic paint in to the surface to give it a bit of patina.
I also did some tribal faces, I had the idea a while ago and never got round to it then. They are made with some clay that I made to give the appearance of wood, then antiqued with some acrylic paint.
The rest are a random mix of texture, along with some that I made from an old polymer clay cane.
I have been playing around with one of my drawings today. I had scanned it on to the computer and decided to add a few digital effects. It was fun to play around. It needs more work but the technique has some potential I think.
A few years ago, I did some prints on to old cotton sheeting, using my HP inkjet printer, which used pigment inks. After drying thoroughly, I was able to wash the printed fabric with very little loss of ink. Although the prints were a little more muted than those done on paper they were still very good.
So this week, I decided to do some more fabric prints. However, what I had forgotten was that not all inkjet printers are created equal. Now I am not sure if it is the type of ink, my current printer uses dye based inks, but it doesn’t give the same results. The ink washes out.
I tried leaving the prints to dry, I tried ironing them, I tried pre-soaking the fabric in a solution of alum, washing soda and fabric softener, none of which made a bit of difference.
I know that there is a product called BubbleJet Set, which purports to help you get colourfast fabric prints. Being a bit grippy, I am loathe to spend money on it as I have no guarantee of it working.
I also have concerns that, even with the Bubble Jet Set solution the prints, being dye based, might fade. I really wish that I still had my old printer 🙁
Do any of you lovely people out there have any experience of this product?
Here in the depths of Aberdeenshire, we get used to things taking a while to get here, sometimes it takes a week or so after ordering, when most other places will receive their stuff the next day. So imagine my surprise, when, the day after ordering it, my fabric turned up! Hurrah!
Not only that but it is really nice fabric and was very reasonably priced.
Quick Fabrics have a good range of material, so it didn’t take me long to put an order together. It’s great to find a shop like this one.
I bought some calico, for printing on, as well as some lovely thick cotton jacquard and some bright poly-cottons. I couldn’t get a good photo of the jacquards, which is a shame as the texture of them is fantastic.
I decided to take a photograph of today’s eggs, just because they look so pretty. The Marans pullets, which I hatched out last year, have begun to lay and I am now getting a lot of eggs each day. When I say I hatched them out I mean that the incubator did! 🙂
The very dark brown ones in the photo are the Marans girl’s eggs. The blue ones area from my Araucana hens. I am really keen to get even more colours of egg.
I have my Araucana cockerel in with my Marans girls and I am hoping to hatch out some of their eggs this year. Any of the resulting chicks that are female should lay an olive coloured egg – the blue egg layer crossed with the brown gives olive. I just hope that my luck is better with this year’s hatching, last year resulted in more cockerels than pullets.
The other colour that I don’t have is white so I am hoping to buy a white egg layer of some sort this year. There are actually only two colours of egg shell, white and blue. The brown and tinted eggs are the result of a coating that is laid down over the egg shell during its transit through the hen’s oviduct.